Single Product Secondary Co2 Regulator

Single Product Secondary Co2 Regulator
by Taprite
(1)

New!: $40.45 (as of 03/12/2013 00:41 PST)

Beer Brewing

Secondary regulators are used when you are attempting to dispense two or more kegs off of the same Co2 tank. A secondary regulator will allow you to regulate the pressure of each keg individually.

• Rank: #144456 in Kitchen & Housewares
• Brand: Taprite

• A secondary regulator will allow you to regulate the pressure of each keg individually.
• To protect dispensing systems each regulator has a built-in high volume external safety relief valve
• Forged brass body for greater durability.
• Outlet fittings feature 1600 ball type shut-off. Fits 5/16" I.D. pressure hose.
• All regulators are pressure tested for leaks and defects prior to delivery.

Description #1 by Living Direct:

The Tap-Rite Two Product Secondary Co2 Regulator (T1672ST) is made to assist you in dispensing two or more kegs off of a single Co2 tank. With this regulator you can control the pressure of the kegs individually. Set to relieve at 55-65 PSIG the built-in high volume external safety relief valve is factory set to protect the dispensing system. The body of the regulator is made of forged brass body for greater durability and to provide enough mass to serve as a heat sink to help prevent freeze up. Outlet fittings feature Taprite 1600 ball type shut-off and fit 5/16 ID pressure hose, while the inlet is designed for 5/16 ID pressure tubing.

Description #2 by Rakuten.com Shopping - KegWorks:

Running 2 kegs off of one air tank? This is the perfect solution to set the pressure to each keg individually, while still using one air tank. Each gauge shows the pressure in the keg it's attached to. There are also shut off valves for each so you can cut the pressure off completely if necessary. The polycarbonate bonnet is lighter weight and stronger than zinc bonnet regulators and it will not corrode in wet environments. No special tools are required to raise or lower the CO2 pressure. The cap knob simply pulls out so it can be turned to adjust pressure up or down then pushes back in to lock in pressure. In stock and ready to ship. Features: Must be used in conjunction with a primary regulator. Gives you the ability to set a different air pressure for each keg. 0-60 gauge measure pressure to each keg. Has air shut off switch for each CO2 line. High CO2 volumetric flow to insure continuity in product dispensing. Bonnet material is glass-filled Polycarbonate. 10 Micron filter built in

Description #3 by Rakuten.com Shopping - KegWorks:

This secondary regulator is used in conjunction with your primary CO2 regulator to set individual gas pressure for an additional keg. Choose the one-barb model for individual keg installations or to terminate a series of regulators. Use the two-barb model for series installations. In stock and ready to ship. Features: Must be used in conjunction with a primary regulator. Gives you the ability to set an individual gas pressure for a keg. Bonnet material is glass-filled polycarbonate. 10 Micron filter built in to keep contaminants out of regulator. 0-60 gauge. Air shut off switch for each CO2 line. High CO2 volumetric flow to insure continuity in product dispensing. Less prone to freeze up problems. Approved by Pepsi and Coca-Cola. Includes: (1) Individual 0-60 psi gauge. Shut off valves for each regulator. Brass fittings. . .